*******************************
DOS installation of SEXIE    :
*******************************

We suggest to link the main programs sexie.for, inshell.for,
makedb.for wavlis.for and infeff.for with a subroutine
library made from all subroutines.

SEXIE will run on virtually any IBM PC, XT, AT or PS/2 compatible
computer running MS-DOS version 3.3 and higher on a processor of the
Intel iAPx86 family. As the program code is rather compact, you
will need only a minimum of 300 kBytes of available free memory.
The exact amount depends on your compiler and dimensioning.
If you do not have a hard disk, you will have to modify the
installation procedure.

The precompiled 32-bit package needs a 386 or higher processor and
does require a coprocessor (or 486/586 DX, not SX).

SEXIE makes use of the DOS extendend screen and keyboard driver
ANSI.SYS, which usually is loaded upon booting by the line

DEVICE=ANSI.SYS     in your CONFIG.SYS - file for a

call to clear the screen. The IBM standard ASCII character set
should be used (character code page 437 - do not use the
multilingual character sets or the screen layout will suffer). If
the results are still unsatisfactory, set icomp = 'VAX' in the
SEXIE.CFG file. This restricts the use of ASCII code above 127.


See the batch file SEXIE.BAT for details of program control.
SEXIE.BAT invokes a viewer to type the output files on screen.
It is named README, but any DOS file viewer of your choice can
be substituted for it.

To receive DOS 32-bit binaries/installation disks please 
1) ftp all files from dos_binaries to your PC (use binary
   ftp)
2) leave a message in the /your_registration directory or
   e-mail to br@oedipus.llnl.gov. DISKS are not free.

BR